企业官网建设流程全解析

html5做手机网站,网站开发模块就业前景,满屋花网页设计代码,网站建设便宜不可信关于处理节点BAT1的时候会调用ACPI!GetOpRegionScope和处理节点BAT2的时候就不用调用ACPI!GetOpRegionScope函数了#xff01;#xff01;#xff01; 第一部分#xff1a;时间上在前。 https://chenghao.blog.csdn.net/article/details/157065028 处理节点BAT1的时候回调…关于处理节点BAT1的时候会调用ACPI!GetOpRegionScope和处理节点BAT2的时候就不用调用ACPI!GetOpRegionScope函数了第一部分时间上在前。https://chenghao.blog.csdn.net/article/details/157065028处理节点BAT1的时候回调用ACPI!GetOpRegionScope1: kd kc#00 ACPI!AsyncEvalObject01 ACPI!AMLIAsyncEvalObject02 ACPI!ACPIGet03 ACPI!IsPciDeviceWorker04 ACPI!IsPciDevice05 ACPI!GetOpRegionScopeWorker06 ACPI!GetOpRegionScope07 ACPI!PciConfigSpaceHandlerWorker08 ACPI!PciConfigSpaceHandler09 ACPI!InternalOpRegionHandler0a ACPI!WriteCookAccess0b ACPI!RunContext0c ACPI!InsertReadyQueue0d ACPI!RestartCtxtPassive0e ACPI!ACPIWorker0f nt!PspSystemThreadStartup10 nt!KiThreadStartupNTSTATUSEXPORTPciConfigSpaceHandlerWorker(IN PNSOBJ AcpiObject,IN NTSTATUS CompletionStatus,IN POBJDATA Result,IN PVOID Context){if (!state-OpRegion-Context) {if (!(state-Flags PCISUPP_GOT_SCOPE)) {state-Flags | PCISUPP_GOT_SCOPE;status GetOpRegionScope(state-OpRegion,PciConfigSpaceHandlerWorker,(PVOID)state,((PNSOBJ)(state-OpRegion-Context)));if (status STATUS_PENDING) {return status;}if (!NT_SUCCESS(status)) {status STATUS_SUCCESS;goto PciConfigSpaceHandlerWorkerDone;}}}第二部分时间上在后。处理节点BAT2的时候就不用调用ACPI!GetOpRegionScope函数了1: kd kc#00 ACPI!GetPciAddress01 ACPI!PciConfigSpaceHandlerWorker02 ACPI!PciConfigSpaceHandler03 ACPI!InternalOpRegionHandler04 ACPI!WriteCookAccess05 ACPI!RunContext06 ACPI!InsertReadyQueue07 ACPI!RestartCtxtPassive08 ACPI!ACPIWorker09 nt!PspSystemThreadStartup0a nt!KiThreadStartupNTSTATUSEXPORTPciConfigSpaceHandlerWorker(IN PNSOBJ AcpiObject,IN NTSTATUS CompletionStatus,IN POBJDATA Result,IN PVOID Context){//// If we have not seen this OpRegion before, we need to// fill in the dwContext with the PNSOBJ of the// PCI device which the OpRegion relates to.//if (!state-OpRegion-Context) {if (!(state-Flags PCISUPP_GOT_SCOPE)) {state-Flags | PCISUPP_GOT_SCOPE;status GetOpRegionScope(state-OpRegion,PciConfigSpaceHandlerWorker,(PVOID)state,((PNSOBJ)(state-OpRegion-Context)));if (status STATUS_PENDING) {return status;}if (!NT_SUCCESS(status)) {status STATUS_SUCCESS;goto PciConfigSpaceHandlerWorkerDone;}}}//// Identify the PCI device, that devices extension,// and the pointer to the interface within the PCI// driver that does PCI config space reads and writes.//state-PciObj (PNSOBJ)state-OpRegion-Context;pciDeviceFilter (PDEVICE_EXTENSION)state-PciObj-Context;if (pciDeviceFilter NULL) {//// The device has not been initialized yet, we cannot perform// PCI config cycles to it. Fail gracefully and return all 0xFF//bytes 0;status STATUS_SUCCESS;goto PciConfigSpaceHandlerWorkerDone;}ASSERT(pciDeviceFilter);interface pciDeviceFilter-Filter.Interface;ASSERT(interface ? (interface-Size sizeof(BUS_INTERFACE_STANDARD)) : TRUE);//// If interface is non-zero, we have enumerated this PCI// device. So use the PCI driver to do config ops.// If it is zero, make some attempt to figure out what// device this request is for. The result will be// used in calls to the HAL.//if (!interface) {if (!(state-Flags PCISUPP_GOT_SLOT_INFO)) {state-Flags | PCISUPP_GOT_SLOT_INFO;status GetPciAddress(state-PciObj,PciConfigSpaceHandlerWorker,(PVOID)state,state-Bus,state-Slot);